In Australia, each state has different regulations for the gas industry – they help to control workmanship standards and the safe use of LPG.

Whenever you need gas work done, you should always use a licensed gas fitter. They're trained professionals who will help make sure the installation complies with the regulations for your state and the Australian Standards requirements.


Gas bottle installation regulations

Gas bottles are placed in specific locations with set clearance zones designed to keep you and your property safe. So what are the key things to watch for?

  • Solid and upright. Gas bottles must be placed on a solid base made of a fireproof material like concrete or pavers, and kept upright at all times. This will keep the gas bottles stable and allow them to safely vent any excess pressure through their pressure relief valves.
  • Ventilation. The space the gas bottles sit in needs to be well ventilated – so spots under stairways, buildings, alcoves or underground are usually not suitable.
  • No ignition sources. As LPG is flammable, gas bottles must be kept a minimum distance away from ignition sources. This reduces the risk of fire in the unlikely event of a gas leak, or during delivery when small amounts of LPG can escape into the air. Potential ignition sources include anything that carries electricity or a flame, like light switches, power points, air conditioning units, lights, motion sensors, security cameras, hot water heaters or BBQs.
  • No building openings. To prevent an LPG leak entering buildings or accumulating in an enclosed space, gas bottles must also be placed away from any wall openings like windows, doors or air vents.
  • No ground openings. As LPG is heavier than air and will sink to the ground if there is a leak, gas bottles need to be kept away from any ground openings like drains or pits.

Gas exchange installations

If you have a gas exchange installation – where your empty LPG bottles are swapped for full ones when they run out – the minimum clearance levels are shown below.
 

Minimum clearance to ignition sources

Minimum clearance to openings

Gas refill installations

If you receive regularly scheduled deliveries where your LPG is topped up on-site by a gas truck, the below diagrams show the requirements for your installation.
 

Minimum clearance to ignition sources

Minimum clearance to openings


Delivery requirements

In addition to ensuring your gas bottle installation meets Australian Standards requirements, there are some essentials your gas supplier will be looking for when it comes to safely visiting your property. These include:

  • Clear access. Locked gates, steep driveways, uneven pathways, low-hanging trees, lots of steps and unrestrained dogs are all items which can prevent a gas truck and its driver from accessing your property.
  • No obstructions. The space around your gas bottle installation also needs to be kept clear. Be sure to keep the area free of shrubs, wood, bins, rubbish and other household items.
  • Line of sight. If your gas is refilled using a hose connected to a gas truck, and the driver is on their own, there'll need to be a clear line of sight between the bottles and the truck while completing the filling. There'll also need to be a space within 30 metres of the bottles where the truck can safely park.
     

LPG compliance certificates and plates

Once your LPG installation is complete, your gas fitter must give you compliance documentation to show that the relevant regulations have been met.

Each state government regulates this differently, so the documentation you're given will depend on where you live. Here's a quick guide:

  • Queensland – Certificate of Compliance
  • NSW – compliance plate affixed to the installation or a Certificate of Inspection/Compliance
  • ACT – compliance plate affixed to the installation
  • Victoria – Certificate of Compliance
  • South Australia – Certificate of Compliance
  • Tasmania – LP Gas Storage Notice (also known as a Start Work Notice)
  • Western Australia – Notice of Completion (NOC) and compliance badge
  • Northern Territory – compliance plate affixed to the installation.

It's important to keep these documents in a safe place. In some parts of Australia, your LPG supplier will need a copy of the document or your compliance number before they can deliver gas to you. If you've lost your compliance documentation, you can get a replacement from a licensed gas fitter.


Get help from a licensed gas fitter

Organise a gas appliance and safety service with Origin.


fixing compliance issues

Compliance requirements are regularly reviewed, and the acceptable standards can change. 

So what should you do if your gas supplier or fitter say there's a compliance problem with your installation?

If the problem's your LPG bottles, then it'll be up to your gas supplier to fix the issue. If they're not aware of the problem already, you should give them a call and let them know they need to repair the bottles so you can get your gas. 

However, if anything other than the gas bottles is causing non-compliance – such as problems with the pipework, regulator, appliances or access to the cylinders – you'll need to get this fixed.

Your gas supplier won't be able to deliver LPG until all issues with your installation have been resolved.


If the problem is due to the location of the gas bottles, pipework or components, or if there is a faulty or non-compliant component, the gas fitter will need to test the site, identify the issue and let you know what needs to be done to make the site compliant.

If there's a potential gas leak on the installation, the gas fitter will need to conduct a pressure test of the regulator, pipework and appliance, and repair any leaks found.
 


More on LPG safety

Using LPG

There's some simple ways to stay safe when using, storing or transporting gas bottles.

LPG safety tips

How gas bottles work

Learn the difference between an automatic and manual changeover system, and when to order gas.

Managing your LPG

Workplace safety

If you use LPG in your business, familiarise yourself with our guidelines and safety data sheets.

Safety in your business